iPad Says “Not Charging” When It Is Plugged In
Suddenly, iPad says, “Not Charging,” When your device stops charging, you run out of ideas; what to do now? Here, we discuss a solution to fix this issue. Before going to the solution, first, we will see why the iPad Says “Not Charging.”
When you try to charge your iPad, my iPhone charger, or a Computer via USB, the iPad is the “Not Charging” problem that might occur. Also, another problem is if you are not using an iPad charger, another charging source may slow down your charging process.
Sometimes people neglect a tip that doesn’t use another charger than iPad’s original charge. Eventually, it creates a problem like “Not Charging.”
When you plug in to charge the iPad, it may be possible that the problem could occur due to the iPad, Internal Software Problem, Charger cable or Adopter, and Charging Port. So, first, we need to find out in which part the loophole is created and stops charging on iPad.
Why is the iPad Not Charging? Check Charging Adopter.
Contents
If possible, then try another Charging cable and adopter. When you put your iPad on charging, adoption might be faulty. So check with another adopter and cable to resolve it.
The recommended charger is Apple’s cable and adopter. As we know, when you plug in with another cable, it slows down your process and will damage your charging capacity. Also, don’t put your iPad on charging via USB in Computer. This situation leads your iPad to “Not Charging,” if you haven’t seen it in the Phone, it shows at the upper right beside the battery icon.
If you successfully use different cables and adapters, the issue is solved; the problem occurs due to old cables and adapters.
iPad’s Software detected its charger, and sometimes the power voltage varied; this power variation creates a problem with Charging Cable and Adopter. When power fluctuations occur, the software stops the system from charging to avoid damage. You should try different adopters or charges before you trash the charger.
If an alternative charger works fine, that is a good sign; the problem is in the charger, not on iPad. But wait, if your iPad is still not charging after replacing the USB adapters, what next? Now, it might be possible that the charging port is problematic. So, we need to check the iPad now.
Restart the iPad
Universal solution tries. First, you put your iPad on charging and showing not charging is an injustice; sometimes, just not using the brain is ok, and restarting may solve a problem. This solution is always possible; plug in it and restart the iPad. Before your iPad turn off, try to restart it. It resolves the problem of software refreshment.
Perform a Hard Reset
If your iPad is facing some software-related problem, a Hard reset is an ultimate solution. But by a hard reset, it deletes all installed applications and personal data; in short, it clears your iPad. So if you have saved any personal data, then back up and store it somewhere so when your iPad works back then, you can restore and use it.
The steps to perform a hard reset are Settings/ General/ Reset/ Erase All Contents and Settings. This is the one way to reset your iPad.
Another way to reset your iPad is to press and hold Power Button and Home Button together until your iPad is turned off. When the resetting process starts, put down the iPad as it is.
Restore Your Back up from iTunes and iCloud
Software glitch is possible; when you update your phone to the latest version, a bug might be there. Not restoring the data might affect charging, so try to restore a backup from iTunes and iCloud.
Are you using the correct charger or not?
Apple warned that, if possible, please use a genuine product charger. If you don’t use iPad Charger, it will surely slow down the charging process. Try to avoid charging using an iPhone charger and USB Charging via computer.
Clean your iPad Charging Port
Is there any dirt in iPad Charging? Have you not checked yet? Then go. Hit the iPhone flashlight near the charging port and look out. Is there something or not?
You should check for debris, dunk, lint, or dirt. Any of these are stopping charging your iPad. To charge, it needs a clean connection. In the Charging port, eight pins are integrated, and the mediator spreads elections via cable to iPad.
While anything that obstructs the charging port then it will stop charging. Also, it might be possible that it damages the charging port and charging cable.
Check Charging Cable
Before you trash the whole charger out, check to charge the cable using another adopter. The first check is cable is damaged or not, whether it’s been discolored, fraying, or on the lightning connector. If you find any problem, then it’s time to replace your charging cable.
Simple, check with another cable, borrow another iPad cable from your friends and colleagues, and then try to charge with it if you find success here, then replace the old cable. If it is still a “Not Charging,” then the problem is on your iPad.
Check Cable Quality
Quality of charging cable is measured by MFi certification, have your charging cable is MFi certified. When you purchase charging cable from a local store to save money, it causes an error. This cable is low-quality cable, and it is not MFi-Certified cable.
These cables damage iPad internal systems. It overheats in a short time span, and it creates internal electronic faults.
When an MFi-Certified cable is damaged, and when you plug in the iPhone and iPad on charging, the software will send a message like “The Accessory may not be supported.” At that time, you must understand that cable now becomes garbage and must pay for new.
Try iPad 12w Wall Charger
When the iPad is running out from Charging, replace it with a Wall charger or try a 12w Wall charger that will work.
When the power supply is insufficient, it creates a problem, So try to plug in a dedicated adopter wall charger. So use this Wall charger in an outlet and try to charge.
iPhone charger is a 5W charger, while the iPad uses a 12W charger. Technically when you use a low-voltage wall charger, it is an obvious thing that the charging process will slow. Sometimes, it drained your battery percentage too.
Sometimes you are playing a game or watching an online video, and a plugin with a 5W charger, reverse despite charging, drains your battery.
Restore iPad in DFU Mode
Directly without using restore software, you can perform the restore process on your iPad with DFU mode. But here, you need to back up your personal files and data. DFU mode erases all data from your iPad and will restore settings like it’s newer. The below steps are to perform a restore process in DFU mode.
Step – 1: Launch iTunes in your Computer System.
Step – 2: Connect iPad to your computer using a USB Charging cable.
Step – 3: Now, Switch off your iPad and then press and hold the Sleep and Wake button for 3-5 seconds.
Step -4: Now, Press and hold Sleep and Wake and home keys together.
Step – 5: Release the Sleep and Wake button after 5 seconds, but continue with the press and hold the Home button.
Step – 6: When the screen remains black, your iPad enters DFU mode. Still, if you can’t see a black screen, follow the steps again.
Step – 7: When your iPad is in DFU mode, iTunes will detect it and prompt up on the screen; now click “ok” to continue the process.
Step – 8: Tap on Restore and Update when the dialog box prompts.
iOS System Recovery
Try iMyFone Fixppo in standard mode and recover iOS System. Follow the below steps to recover iOS System by using iMyFone Fixppo.
Step – 1: Download iMyFone Fixppo and Install it on your System.
Step – 2: Launch iMyFone Fixppoin your system with “Standard Mode”
Step – 3: Connect Your iPad to your computer system with a USB cable and click on next.
Step – 4: Firmware download page will open, and click on download to install the latest firmware in your system.
Step – 5: Hit click on Start to fix iOS. Which is your iPad Device
Step – 6: The Fixing process will take several minutes. Once it is completed, then automatically it notifies.
iMyFone Fixppo is easy to use, with simple steps you need to follow and fix the issue; no data loss risk by using this software, not only for the iPad “Not Charging” issue, but it can fix other software problems also.
Apple Support
The ultimate and worst-case scenario solution is when you have tried the above tricks and can’t get rid of them. Go for daddy, report at apple support. They have an expert team to repair, to solve such cases of Apple products.
When you connect with Apple support, they will give you some tips related to the above, so don’t panic; understand them and try to perform it.
Genius bar is there for you; make an appointment at the genius bar; if you can’t make a face-to-face appointment, contact them. They want you to put down an iPad at the store; wait until they get back to you after checking Apple’s diagnosis.
Check for warranty; if your iPad is under warranty, you don’t need to worry about paying. But if your iPad is out of the device, pay a healthy amount for repairs.
After Diagnosis, Apple will call their store, explain the accurate problem and what the fault is, and then they estimate the cost for repairing. After you confirm a certain amount, they will start repairing it.
Last Words
When iPad Says “Not Charging,” it is ok with bugs and legs in the system; problems always come to solve. The problem is related to Software and hardware; these methods, tricks, and solutions to resolve it.
These methods are tried and tested, which will never increase your pain while solving the iPad “Not Charging” Problem.