iPad Home Button Not Working, Fix
Sometimes, the iPad home button lags out and out of its services. You can’t do anything by pressing the iPad home button. Whenever your iPad button is turned on in the out-of-service mode, try a solution you can do yourself. Yes, it works; you don’t need to report an issue on the desk of apple support.
This article will show a few methods to fix iPad Home Button Not Working.
Turn on Assistive Touch
Contents
The assistive touch on iPad is working as a Virtual Home Button. Every iPad gets this feature in case of emergency you are running out of the services of the Home Button. So, To activate Assistive Touch, Follow the below steps.
Step – 1: Open Setting by tapping on the Gear icon. It remains on your home page.
Step – 2: Start Scrolling and Search the “General” Settings on the iPad. Which is integrated into the left panel of the settings tab.
Step – 3: Tap on Accessibilities to open it.
Step – 4: Now Scroll Down, Find “Assistive Touch,” and tap to open it.
Step – 5: Where you can see a toggle button, Turn in on; it will turn to the green where it shows Assistive touch is active now.
As of now, the Assistive touch virtual home button appears on the screen. If your one useful part is damaged, then it is not a permanent solution; you should try to fix the original issue of the Home Button.
Turn on DFU Mode
Before you put your iPad in DFU mode you need to take a backup of your iPad. Otherwise, it might be possible that your iPad data is going into the lost.
So Now, Assume you are done with the iPad Backup process. And start the process of putting in DFU Mode and restoring. But if your Home Button is not working, you cant restore it properly, so you need some software that restores your data on your iPad.
If the Home Button is not working cause of any hardware issue, then DFU mode can’t be working to fix it.
So, Confirm first by which cause your Home button is suffering If you pay for some software solution and by checkup, it is said that I’m not working cause of this and that hardware, then it will not be feasible for both.
Recalibrate the iPad Home Button
Recalibration of the iPad Home Button is under the troubleshooting category. Try to recalibrate; by this deed, it might be possible that the home button is working properly.
Steps to follow to recalibrate the iPad Home Button.
Step – 1: Press and Hold the iPad Power button.
Step – 2: When the action “Slide to Power off” appears on your iPad’s screen, release the power button and hold down the home button.
Step – 3: Hold the home button until you are not redirected to the home screen.
This way, you can perform a recalibration of the iPad Home Button, if the home screen appears on your iPad, then it works.
Fix iPad System Problems
Use third-party troubleshooting and fixing app iMyFone Fixppo. This software is a recommendation of the technology experts. Fixppo Software is used to fix minor iOS-related issues. And it covers the not-working iPad Home Button also.
Follow the steps below to repair the iPad Home Button issue by iMyFone Fixppo.
Step – 1: Download the Fixppo App; it is available for both Free Trial and Paid Version. But for a start, you can use the Trial version.
Step – 2: After Downloading, Install it and Open it by clicking on the “Standard Mode” of the software.
Step – 3: Please Note: Software is for laptops; now you can Connect your iPad With a USB cable to your computer system. When it shows your iPad’s graphics are connected, click on “Next.”
Step – 4: In Device Model Selection Area Space, Select your iPad Model. And Download the necessary firmware.
Step – 5: Now, Click on “Start,” It will start fixing the issue. You can show the process in the Progress bar; once it will complete it is prompted on the screen.
You can fix the iPad Home Button not Working issue using iMyFone Fixppo Software.
Check for Portrait and Landscape View
Sometimes users are confused about the iPad Landscape and Portrait View. This problem frequently occurs on the iPad. And Many users have reported an issue related to landscape and portrait views.
Follow the below steps to head in the direction of the solution.
Step – 1: Your iPad is in Portrait View Mode, Press and hold the home button at that time.
Step – 2: Now, Keep holding the home button. Put your iPad into landscape mode.
Step – 3: Put your device into the Portrait view mode.
Note: Observe, When you perform these actions on your iPad, Screen should be rotated.
Step – 4: Go to the Home Button.
Check your iPhone Home Button and Whether it’s been working.
These methods are troubleshooting methods If your iPad Button is suffering from any hardware issues, then if you are trying these methods, it won’t work. So You need to repair your iPad with the help of Apple Support.
Now, What to do next to bring up your iPad in Apple Care. First, You need to make an Appointment in AppleCare+.
Before making an Appointment check the iPad Warranty card; if your iPad is under warranty, you don’t need to pay the extra hardware cost. But if your warranty period is closed, you have to pay a certain amount; this amount is quoted after checking your iPad in Apple Support Care. Generally, They replace your hardware part; in such cases, they replace the home button on your iPad.
So far, we have seen troubleshooting methods that work if your iPad Home button is not working due to any software issue. If it causes by the hardware, then your only option is to reach up to Apple Support.